![]() Use the winch to finish pulling the boat onto the bunks.Drive the boat far enough onto the trailer so the winch hook can be attached to the bow eye.Back the trailer up, so two-thirds of the rollers and bunks are in the water.Be sure the towing vehicle is set in place before you try to pull your boat onto the ramp.Back off the ramp a bit so they can get the trailer backed into the water.Drive slowly up to the ramp to allow someone else to get the towing vehicle and trailer.With a little bit of planning and common sense, you can easily retrieve your boat from the water and load it on the trailer. One person can deal with the boat while the other can deal with the tow vehicle.īoat ramps will be wet and slippery, so you must be careful while walking around and dealing with your boat.Ĭheck out the BoaterExam video to see how to launch a boat: It’s always a good idea to bring a helper.This keeps the vehicle from going into the water (accidents have been known to happen). Place your vehicle into park, setting the parking brake.Unfasten the winch strap and safety chain.Slowly back your boat into the water until it starts floating.As you become more familiar with the process, your launch time will shorten. If you’re new to boat launching, there’s no shame in taking your time. You have to deal with both the tide and water levels. Now, every public boat ramp is different when it comes to launching conditions. You won’t inconvenience other boat launchersĪccording to the protocol, you want to quickly launch your boat.You won’t skip steps to hurry up and get in the water.Look over the owner’s manual to see what these steps are for your boat model.īy keeping to the side and going through these steps, ensures two things: Read over the pre-ride checklist, which varies from model to model.Load the gear into the boat, put the plug in, remove the cover and straps, and do what is necessary to ensure the lines don’t become clogged.When you get into the parking lot, get over as much as possible, as to let others go before you so they can launch their boats.What should be done before you try launching? You certainly don’t want to be doing this at the launch with other people waiting on you to get done. Several things must be done before you can launch your boat. 3 Key Steps To Take Before Going To A Boat Launch (Pre-Launch Preparation) One trailer shouldn’t impede on other lanes. Make sure you’re using the farthest ramp, allowing others to launch their boat while you try to unload and launch yours. ![]() If you’re a newbie boat launcher, it’s a good idea to find a place that has set up a loading ramp away from the launching ramps. A little bit of knowledge ahead of time on the local rules will ensure a more successful, less stressful launch. The last thing you want to be known as is the person who made others wait while you readied the boat. It is imperative to research and learn the proper boat ramp protocols way before you even get to one. What Are The Proper Boat Ramp Protocols For A Successful Launch
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |